
What's in this roadmap
- Why a pool table is not ordinary furniture, and never should be treated like one
- What actually goes wrong when a pool table is moved badly
- Before you start: gear, helpers, and the plan
- How much a pool table and its slate actually weigh
- Step 1: Measure, plan, and decide: disassemble or hire it out
- Step 2: Remove the rails and pockets
- Step 3: Remove the felt, or protect it if it’s staying
- Step 4: Lift and remove the slate, one section at a time
- Step 5: Remove the legs and separate the frame
- Step 6: Wrap and pad every piece individually
- Step 7: Move the pieces and load the truck
- Step 8: Transport flat, then reassemble and relevel
- Specialty movers versus a labor-only crew versus DIY
- Illustrative cost by table size and help level
- Where a specialty pool table move’s cost goes
- Permits, stairs, and whether the table will even fit
- Choosing where the table goes in the new home
- Cleaning and maintaining the table during the move window
- A worked example: a 7-foot table across town
- One-piece slate versus three-piece slate: what changes
- Long-distance pool table moves
- Insurance and who covers the table if it’s damaged
- Common pool table moving mistakes
- Troubleshooting: the table doesn’t play right after the move
- Your pool table moving checklist
- The bottom line
Short answer: Moving a pool table means disassembling it: remove the rails, lift out the slate bed (one piece at a time for a three-piece table), detach the legs, then wrap, transport, and rebuild everything, releveling the frame and slate precisely at the destination. Illustratively, a specialty mover's full disassemble-move-reassemble package runs a few hundred dollars for a standard table locally, less through labor-only help or an experienced DIY team. The slate is the heaviest, most damage-prone part of the whole job; handle every section with real, deliberate respect.
A pool table looks like one large, solid piece of furniture, and that is exactly the wrong way to think about moving one. Underneath the felt is a slate bed, genuinely heavy stone or stone-composite, split into sections that each weigh as much as a loaded appliance, resting on a frame that was built to be assembled once and left alone. Trying to carry a pool table as a single unit, the instinct that works for a dresser or a bookshelf, is how slate gets cracked, frames get wrenched, and tables that used to play perfectly true never quite roll straight again.
This roadmap walks the actual sequence: disassembling the table correctly, handling the slate with the respect its weight demands, moving every piece safely, and rebuilding and releveling it so it plays the way it did before. It sits alongside our heavy-furniture roadmap, which covers the general lifting judgment calls this move shares with other oversized items, and our moving-cost calculator roadmap, which prices the rest of a household move around this one specialty job.
Key takeaways
- A pool table must be disassembled to move safely; never attempt to carry a standard slate table as one assembled piece.
- The slate bed is the heaviest, most damage-prone part, commonly 400 to 1,000 pounds total split across sections that each need at least two people.
- Releveling the frame and slate precisely at the destination is what actually makes a moved table play true again; rushing this step is the most common mistake.
- Illustratively, a specialty mover's full disassemble-move-reassemble package runs a few hundred dollars locally for a standard table; labor-only help or an experienced DIY team costs meaningfully less.
- If you've never disassembled a slate table before, hiring help with real pool table experience is usually the cheaper choice once the risk of a cracked slate or a table that never plays level again is counted honestly.
Why a pool table is not ordinary furniture, and never should be treated like one
A pool table combines genuine weight with genuine precision in a way few household items do. The slate bed is heavy enough on its own, 400 to 1,000 pounds depending on the table, that moving it carelessly risks real injury, and it is also a rigid, brittle material that cracks rather than dents if dropped or flexed, unlike a wood or metal piece of furniture that might merely scratch. On top of the weight problem, the table’s whole purpose depends on sub-millimeter precision: a slate bed with any unevenness or a seam that is not perfectly aligned will produce a table that visibly rolls wrong, which is a different kind of failure than a scratched dresser.
That combination, heavy enough to injure you and precise enough to ruin the table’s function if handled carelessly, is why this move gets its own roadmap rather than borrowing from a general furniture move. The sequence that works treats disassembly as a methodical, unhurried process and treats the releveling at the end as equally important as the lifting in the middle.
It helps to place a pool table alongside the other specialty items this site’s tutorials already cover. A piano is heavy and precision-sensitive about its internal mechanism but travels as one assembled unit; a hot tub must be drained and disconnected but also largely travels as one piece once emptied; a pool table is the one object on this list that genuinely has to come apart into several separately heavy, separately fragile pieces before it can move at all. That extra step, full disassembly, is both the added burden and the reason a pool table move rewards patience more than muscle.
What actually goes wrong when a pool table is moved badly
A few specific failures account for most of the bad outcomes this desk hears about. Attempting to move the table assembled, or significantly assembled, is the most common, and it typically ends with either an injury from the unexpected weight or a cracked slate from the frame flexing under a load it was never built to be carried under. Dropping or unevenly supporting a slate section during the lift is the second, and a crack can happen even on a short drop since the material is brittle rather than forgiving.
Skipping or rushing the releveling step at the destination is the failure that shows up latest and surprises people the most: the table looks fine, gets reassembled, and only once balls are rolling does it become obvious that a ball drifts toward one corner or a seam creates a visible bump. This is avoidable with patience and the right tools, and it is exactly the step a rushed DIY move is most likely to shortchange.
Before you start: gear, helpers, and the plan
Gather a socket set and screwdrivers matched to your table’s hardware, which varies by manufacturer, heavy-duty furniture dollies or straps rated for a few hundred pounds per lift, moving blankets for padding every slate section and the frame, and a carpenter’s level for the releveling step at the end. Decide upfront whether the felt will be reused or replaced, since that single decision affects exactly how carefully it needs to be removed during the disassembly process.
Recruit at least three to four people for a standard table, more if stairs are involved, since a three-piece slate table’s heaviest single section can still weigh over 200 pounds and genuinely needs two sets of hands lifting together rather than one person attempting it alone. Measure the route, every doorway, hallway turn, and stair, in both the old and new locations before moving day, the same discipline this site’s piano-moving roadmap recommends for its own oversized, precision-sensitive object.
How much a pool table and its slate actually weigh
The numbers here explain why disassembly is not optional. A standard three-piece slate bed for a common 7 or 8-foot table commonly weighs 400 to 600 pounds total, each of the three sections roughly 150 to 250 pounds individually, while a 9-foot professional table’s slate can run 700 to 1,000 pounds total. The wood frame, rails, and legs add more weight on top of the slate, though none of those individual pieces typically approaches a single slate section’s weight once everything is properly disassembled.
Compare that to the roughly 70 to 100 pounds most people can reasonably lift with a partner, and the case for never attempting to move an assembled or partially assembled table becomes obvious. Every piece, handled separately, is a manageable two-person lift; the whole table, handled together, is not.
Step 1: Measure, plan, and decide: disassemble or hire it out
Measure the table and the full route at both addresses, and honestly assess whether this is a DIY job or one worth hiring out. If you’ve never disassembled a slate table before, or if the route includes stairs or tight turns, this is the moment to call a specialty mover rather than discovering the difficulty mid-disassembly.
Step 2: Remove the rails and pockets
Unscrew the rails from the frame, usually accessed from underneath or through the pocket openings, and set them aside padded and labeled, since rail hardware is often specific to its original position. Removing the rails exposes the felt and the pockets, which come free once their attachment points are released.
Step 3: Remove the felt, or protect it if it’s staying
If the felt is being replaced, this is the point to carefully pull it free; if it’s being reused, work slowly to avoid tearing it loose from the slate, since felt glued directly down is more fragile during removal than felt that was only stapled at the edges.
Step 4: Lift and remove the slate, one section at a time
With the felt clear, unscrew the slate from the frame and lift each section separately, always with at least two people per section given the real weight involved, never sliding a piece across the frame or floor. Set each section down flat on a padded surface immediately rather than leaning it, since slate resting at an angle is at real risk of slipping and cracking.
Step 5: Remove the legs and separate the frame
Detach the legs from the frame, typically bolted or heavily screwed on, leaving the bare wooden frame as its own, much lighter and more manageable piece. Wrap the frame in moving blankets to protect its finish and joints during transport.
Step 6: Wrap and pad every piece individually
Wrap each slate section, the frame, the rails, and the legs separately in moving blankets, securing the padding so it cannot shift and expose a corner during the carry. Label pieces if your table has any manufacturer-specific hardware or alignment marks, since reassembly goes faster and more accurately when you are not guessing which piece went where.
Step 7: Move the pieces and load the truck
Move each piece individually through the route you measured in Step 1, never carrying two pieces at once even if they seem light enough, since a pool table move rewards slow, deliberate single-piece trips over rushed, overloaded ones. Load the slate sections flat and fully supported in the truck, never standing on edge, and secure the frame, rails, and legs separately so nothing shifts during transport.
Step 8: Transport flat, then reassemble and relevel
Keep the slate flat and supported for the entire drive, since even a well-padded section can crack if it rides at an angle or absorbs a hard jolt unsupported. At the destination, reverse the process: set up the frame and legs first, level the bare frame with a carpenter’s level before the slate goes anywhere near it, reinstall the slate sections, check the playing surface itself for level in multiple directions, shim any seam that shows unevenness, then reinstall or replace the felt and reattach the rails and pockets last.
Specialty movers versus a labor-only crew versus DIY
A specialty pool table moving company brings exactly the experience this job rewards: correct disassembly, careful slate handling, and crucially, the releveling and recushioning skill that actually makes a moved table play true again, which is the part of the job a general mover or an inexperienced DIY attempt is most likely to shortchange. For anyone moving a table for the first time, or moving a 9-foot professional table, this is the safer and often the smarter spend.
A labor-only crew experienced specifically with bulky or specialty items, hired by the hour for the physical lifting and carrying, can handle the disassembly and transport competently if you or someone present has disassembled a pool table before and can direct the releveling at the end. A DIY move with no prior experience is the riskiest of the three options specifically because releveling a slate bed correctly is a skill that rewards practice, and getting it wrong leaves you with a table that moved safely but doesn’t play right afterward.
Weigh the decision the same honest way this roadmap’s other specialty-item guides do: match the help level to your actual experience and the actual difficulty of your specific route, rather than defaulting to whichever option looks cheapest on paper. A flat, stairs-free route and a helper who has done this exact job before is a reasonable DIY candidate. The same table with a narrow staircase or zero prior disassembly experience between everyone involved is a much better fit for paid help, regardless of the extra cost, because the downside here, a cracked slate or a table that never plays level again, is expensive in both money and the simple disappointment of a favorite piece of furniture not working the way it used to.
Illustrative cost by table size and help level
Putting table size and help level side by side shows the real spread in what this specific move costs.
Illustrative local pool table moving cost, by size and help level
Full disassemble, move, and reassemble, a short local distance. Illustrative, not a quote.
Table size and help level both move the number; a professional 9-foot table through a specialty mover sits at the top, a standard table handled by an experienced DIY team sits at the bottom.
Where a specialty pool table move’s cost goes
Breaking a specialty mover’s price into its components shows what the premium over a general mover actually buys.
Where a specialty pool table move's cost goes
Illustrative share of a professional disassemble-move-reassemble package. Your mix will vary by table and route.
Reassembly and releveling is the single largest share, which is exactly the skill a general mover without pool table experience is least likely to perform well.
Permits, stairs, and whether the table will even fit
Before scheduling anything, confirm the table’s disassembled pieces, especially the largest slate section, will actually clear every doorway, stairwell, and turn on the route at the new address, not just the old one. A table that was carried in during original construction, before walls and doorframes were finished, occasionally cannot be removed the same way years later, and discovering this after disassembly has already begun is a far worse position than confirming clearance on paper first. Measure the narrowest point on the route and compare it honestly against your largest slate section’s dimensions before committing to a specific plan.
Stairs deserve their own specific caution beyond the general heavy-lifting guidance this site’s heavy-furniture roadmap already covers, since a slate section on a staircase combines awkward bulk with a fall hazard that flat-ground carrying does not have. If the route includes a full flight of stairs, strongly consider a specialty mover or at minimum a labor-only crew with real experience on stairs specifically, since the combination of a heavy, brittle load and a staircase is exactly the scenario where professional experience earns its price.
Choosing where the table goes in the new home
Before the table is even disassembled at the old address, it is worth confirming the new room can actually accommodate it, both for clearance during the move and for how it will be used afterward. A pool table needs real clearance around its full perimeter for players to comfortably take a shot with a full-length cue, commonly five feet or more on every side depending on cue length, which is a larger footprint than the table itself suggests and a common source of regret when a table ends up wedged into a room that technically fits the table but not the gameplay around it.
Check the floor as well as the room’s dimensions: a pool table’s weight is concentrated on relatively small leg footprints, and a floor that flexes or is not rated for that concentrated load, an upper floor in some older homes, for instance, is worth a second look before the table is reassembled there. This is also the moment to decide on lighting and any other room features that depend on the table’s exact placement, since moving a reassembled, releveled table a second time to fix a placement mistake is considerably more work than measuring carefully the first time.
Cleaning and maintaining the table during the move window
A pool table that sits disassembled for any length of time between the old and new address benefits from a few small protective habits most people skip under moving pressure. Clean the slate surface of dust and any ball residue before wrapping it, since debris trapped under moving blankets for an extended period can embed into the felt if it ends up reinstalled without a thorough cleaning first. Keep hardware, screws, bolts, and leg levelers, in clearly labeled bags rather than loose in a box, since generic-looking pool table hardware is easy to mix up with other moving-day screws and bolts if everything ends up in one general parts bin.
If there is any meaningful gap in time between disassembly and reassembly, store the slate sections flat, padded, and somewhere dry rather than standing on edge or exposed to moisture, since slate itself is fairly stable but the felt and any wood components are not immune to humidity or temperature extremes over a longer storage period. A short gap of a few days rarely causes problems with reasonable care; a longer gap of weeks or months is worth treating as genuine storage, with the same climate and handling considerations our climate-controlled storage roadmap covers for other sensitive items.
A worked example: a 7-foot table across town
A household moving a standard 7-foot three-piece slate table about five miles hires a specialty pool table mover rather than attempting DIY disassembly for the first time, specifically because they want the releveling done by someone who has done it before. The crew arrives, removes the rails and felt, lifts the three slate sections individually with two people per section, removes the legs, and has the entire table disassembled and loaded within about ninety minutes.
At the new home, the crew sets up and levels the bare frame first, reinstalls the slate, checks the playing surface with a precision level in multiple directions, shims one seam that shows a slight gap, then reinstalls the felt and rails. The full job, illustratively near $350 on this roadmap’s model, takes about four hours total, and the household considers the releveling alone worth the price once they roll a few practice shots and confirm the table plays exactly as it did before.
One-piece slate versus three-piece slate: what changes
Not every slate table is built the same way, and the construction changes how much of this roadmap applies directly. A three-piece slate table, the more common construction on standard-size tables, splits the bed into three separate sections precisely so each one is lighter and more manageable to remove and transport than a single enormous slab would be, which is exactly the disassembly this roadmap walks through. A one-piece slate table, more common on some smaller or older tables, has a single slab for the entire bed, which simplifies the leveling question somewhat, since there are no seams to align, but makes each individual lift meaningfully heavier and harder to manage safely without more hands or mechanical assistance.
If your table uses a composite or slate-style synthetic bed rather than true stone slate, the weight drops noticeably, sometimes light enough for a confident two or three-person team to handle the whole bed as one piece over a short distance, but confirm this specifically for your table rather than assuming a lighter-looking table is automatically a true slate-style composite, since the two can look similar from the outside while behaving very differently once you try to lift them.
Long-distance pool table moves
A pool table moving across town and one moving across the country share the identical disassembly and reassembly sequence, but a long-distance move adds transport considerations worth planning for specifically. Slate sections riding for hours on a highway need more thorough padding and more secure bracing than a short local drive requires, since sustained vibration over distance is a real test of whatever straps and blankets are holding each piece in place. Temperature swings during a long haul are also worth a moment’s thought, since extreme heat or cold is not generally damaging to slate itself but can affect felt and glue if the table sits in an un-climate-controlled trailer for an extended period.
For any move crossing a significant distance, this is one of the clearer cases for hiring a specialty pool table mover rather than a general long-distance carrier, since a company that handles pool tables regularly will have padding, bracing, and loading techniques specifically developed for slate’s particular combination of weight and fragility, something a general household-goods carrier may not have practiced as often.
Insurance and who covers the table if it’s damaged
Because a pool table is both expensive to replace and genuinely at risk during this specific move, knowing who covers damage before moving day matters more than it would for ordinary furniture. A licensed, insured specialty pool table mover carries liability coverage for the items they handle, though as with any mover, the specific limits and exclusions vary by company and are worth reading before you book rather than after something goes wrong. A general moving company’s standard valuation coverage, the kind that applies to an ordinary household shipment, may undervalue a pool table significantly relative to its real replacement cost unless you specifically declare its value and purchase additional coverage for it.
If you are moving the table yourself or with a general labor-only crew, check whether your homeowner’s or renter’s policy has any relevant coverage for a specialty item damaged during a self-arranged move, and consider photographing the table’s condition, especially the felt and any existing marks on the slate or frame, before disassembly begins. That documentation gives you a real baseline if a dispute over new damage comes up once the table is back together at the new address.
Common pool table moving mistakes
The errors this desk sees most, collected in one place.
- Trying to move the table assembled. The combined weight is too much and too awkward, and the risk of a cracked slate or an injury is not worth whatever time it might save.
- Lifting a slate section with fewer than two people. A single section can weigh over 200 pounds; always lift with a partner, never solo.
- Leaning slate against a wall instead of laying it flat. Slate resting at an angle can slip and crack; always set sections down flat and padded.
- Rushing the releveling step. A table that moved perfectly but was reassembled without careful releveling will not play true, and this is the single most common disappointment after a move.
- Skipping the felt inspection. Felt that tore during removal and goes back on anyway looks fine until the first few games reveal snags or uneven roll.
- Not labeling rail and leg hardware. Generic-looking screws and brackets are often position-specific, and guessing during reassembly costs real time.
- Underestimating the headcount. A three-piece slate table genuinely needs three to four people minimum; being short-handed is how pieces get dropped.
Every one of these traces back to treating a pool table like ordinary furniture instead of the heavy, precision-built object it actually is, and every one is avoidable with the same unhurried, piece-by-piece approach this roadmap lays out from the first measurement to the final practice shot.
Troubleshooting: the table doesn’t play right after the move
If a ball consistently drifts toward one side or corner after reassembly, the frame or slate is very likely not level, and the fix is rechecking with a precision level in multiple directions and adding thin shims at whichever point reads low, rather than assuming the table simply “settled” into the issue. If there’s a visible bump or gap at a slate seam, the sections were not pulled tightly enough together during reassembly, which usually means loosening the slate screws slightly, realigning the seam by hand, and retightening evenly rather than from one side first.
If the felt shows new snags, bubbles, or looseness after the move, the felt likely did not survive removal as well as hoped, and replacing it, rather than trying to smooth out a damaged section, is the more reliable fix for a table that needs to actually play well rather than just look acceptable.
Your pool table moving checklist
- Measure the table, the slate sections, and every doorway, hallway, and stair on the route
- Decide honestly whether this is a DIY job or worth hiring a specialty mover
- Gather a matched socket set, dollies or straps rated for heavy single lifts, and moving blankets
- Confirm three to four helpers are available, more if stairs are involved
- Remove the rails, pockets, and felt, labeling hardware as you go
- Lift and set down each slate section flat and padded, always with two people per section
- Remove the legs and wrap the frame separately
- Transport slate sections flat and fully supported, never on edge
- At the destination, level the bare frame before the slate goes back on
- Reinstall slate, check the playing surface for level in multiple directions, and shim any seam that needs it
- Reinstall or replace the felt, then reattach the rails and pockets last
- Roll a few practice shots to confirm the table plays true before calling the job finished
The bottom line
Moving a pool table safely means respecting two separate facts about it: the slate is genuinely heavy enough to injure you if handled carelessly, and the whole table is precise enough that a rushed reassembly leaves you with a table that moved fine but never quite plays right again. Disassemble it methodically, rails first, then felt, then slate one section at a time, then the legs, move every piece separately and supported, and give the reassembly and releveling at the destination the same careful attention as the lifting in the middle. Illustratively, a specialty mover’s full package runs a few hundred dollars locally for a standard table, meaningfully less through labor-only help or an experienced DIY team, and the right choice depends honestly on whether you or someone helping has done this specific job before. Our heavy-furniture roadmap and moving-cost calculator roadmap cover the rest of a household move this specialty job sits inside, and the calculator elsewhere on this site prices what the new address will ask of your budget once the table is back together and rolling true. Match the help level to your real experience, and the table that made the trip safely will still be the one everyone wants to play on at the new place.
This roadmap is published by the ReloPeak desk for education, not as manufacturer-specific or professional installation guidance. Every weight, cost figure, and timeframe in it is illustrative; real figures vary by your specific table, its construction, and your route. Check your table’s own manufacturer guidance where available, and strongly consider a specialty pool table mover for any table you have not personally disassembled and releveled successfully on a prior occasion.
Frequently asked questions
How much does it cost to move a pool table?
Illustratively, hiring a specialty pool table moving company for a full disassemble, move, and reassemble commonly runs a few hundred dollars for a standard 7 or 8-foot slate table over a short local distance, more for a 9-foot professional table or a longer move, and meaningfully less through a general labor-only crew experienced with bulky items or a careful, well-equipped DIY approach with an experienced helper. The real cost drivers are the table's size and slate construction, one-piece versus three-piece slate, the distance, and how many stairs, doorways, or tight turns the route includes. Gather a specific quote on your table rather than relying on a generic average, since a specialty mover's package price usually includes careful releveling and recushioning the felt, work a generic moving quote never covers.
Can you move a pool table yourself?
A one-piece slate or slate-style table, and some smaller tables, can realistically be moved by two experienced, careful people with the right tools and a clear plan, but a standard three-piece slate table is a meaningfully harder DIY candidate because each slate section alone can weigh 200 to 300 pounds and the pieces must be relocated, realigned, and re-leveled precisely to play correctly afterward. If you've disassembled and reassembled a slate table before, a DIY move is realistic with at least three to four people; if this is your first time, hiring a specialty mover or a labor-only crew experienced specifically with pool tables is the safer and often the cheaper choice once the risk of damage or a table that never plays true again is weighed honestly.
How do you disassemble a pool table before moving it?
Remove the balls and any accessories first, then unscrew and remove the rails, which exposes the pockets and the felt-covered slate bed underneath. Carefully pull up the felt if it needs to be removed for the slate to come out, or leave it stapled to the slate if the plan is to keep the same felt, then unscrew and lift the slate sections, one piece at a time for a three-piece table, each one needing at least two people given the real weight involved. Finally, remove the legs from the frame, which usually detach with bolts or large screws, leaving the frame, slate pieces, rails, and legs as separate components ready to wrap and transport.
How much does a pool table slate weigh?
A standard three-piece slate bed for a common 7 or 8-foot table commonly weighs 400 to 600 pounds total, split across three sections that each weigh roughly 150 to 250 pounds individually, while a 9-foot professional table's slate can weigh 700 to 1,000 pounds total. A one-piece slate or a slate-style composite table is often somewhat lighter overall but still substantial, commonly 300 to 500 pounds for the playing surface alone. These figures are illustrative and vary by manufacturer and table size, so treat the slate as genuinely heavy regardless of the exact number before planning how many people and what equipment the move needs.
Can a pool table be moved in one piece without disassembling it?
For most standard slate tables, no, not safely or practically; the combined weight of the frame, slate, and rails together is too much to carry as one unit through a typical home's doorways and hallways, and attempting it risks cracking the slate or damaging the frame under its own shifting weight. Some smaller, lighter tables, particularly slate-style composite tables without true slate, may be moved assembled over a very short, obstacle-free distance, but checking the table's actual construction and weight before attempting this, rather than assuming it is possible, avoids a mid-move discovery that it is not.
Do you need to replace the felt when moving a pool table?
Not always, but it depends on the felt's condition and how it was attached. Felt that is glued directly to the slate often tears or lifts during careful removal and commonly needs replacing afterward, while felt that was stapled around the rails and slate edges has a better chance of surviving removal and reinstallation intact if handled carefully. Many specialty pool table movers include a felt inspection as part of their reassembly service and will tell you honestly whether your existing felt is likely to survive the move or whether replacement is the more realistic plan.
How do you relevel a pool table after moving it?
Releveling starts with the frame and legs on the new floor, using a carpenter's level and the table's adjustable leg levelers or shims to get the frame itself sitting level before the slate ever goes back on. Once the slate sections are reinstalled, a precise check uses a level directly on the playing surface in multiple directions, with thin shims placed under slate seams as needed to eliminate any bow or low spot, since even a small unevenness is very noticeable once balls are rolling. This is a genuinely fussy, patience-rewarding task, and it is the specific skill a specialty pool table mover is paying for when their price looks higher than a general mover's.
How long does it take to move and reassemble a pool table?
A full disassemble, transport, and reassemble for a standard table commonly takes experienced movers four to six hours total, split roughly evenly between taking it apart, moving the pieces, and putting it back together and releveling it at the new location. A first-time DIY attempt should expect to take meaningfully longer, since the disassembly and especially the releveling and recushioning steps reward experience, and rushing the releveling step specifically is the single most common reason a moved table never quite plays the way it used to.